Leading 10 common forklift accidents ， forklift procedure need to pay attention to these issues ！.

Do not underestimate the forklift at the office. If the procedure is bad, there will certainly be serious mishaps in minutes, and there are lots of mishaps including forklifts.

Situation 1: The forklift freight obstructed the vehicle driver's sight, and the individual ahead might not be discovered, leading to a rolling mishap.
Instance 2: In order to keep the equilibrium of the forklift when raising hefty products, the workers utilized their body weight as the counterweight, which practically triggered casualties.
Case 3: The width of the forklift freight goes beyond the allowed size of the path and hangs on the roadside shelf, which virtually creates an mishap.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Situation 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the workers illegally, the forklift driver does not put on the safety belt, the forklift lifter falls and the driver is squashed when the forklift rolls over.
Situation 7: The forklift chauffeur did not wear a safety belt and fell from the vehicle when it rolled over and was squashed.
Forklift operation should pay attention to these issues ：.

Begin.
1. Before beginning, observe the surroundings, and after validating that there are no challenges that hinder the safety and security of driving, honk the horn initially and after that begin.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be secure before beginning.
3. When the forklift starts with a lots, the chauffeur should first validate that the tons is secure and trustworthy.
4. The start needs to be slow and consistent.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the pole should be slanted backward. .
2. Do not raise the fork too expensive when driving. When getting in and leaving the job website or while driving, be careful that there will be no obstacles in the sky. When the lots is taking a trip, the fork must not be increased expensive, which will impact the stability of the forklift. .
3. After discharging, the fork should be lowered to the regular driving position prior to driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal must be provided first. High-speed sharp turns are restricted. High-speed sharp turns will certainly create the vehicle to shed side stability and topple. .
5. When the forklift is downhill, it is purely restricted to turn off the fire and slide, and it is prohibited to brake all of a sudden while driving with loads unless there are unique situations.
6. When the forklift is running, it must follow the website traffic rules in the manufacturing facility and need to keep a specific safety range from the lorry ahead. .
7. When the forklift is running, the load has to be in the most affordable position that does not prevent the driving, and the gantry ought to be correctly tilted back. The load shall not be increased other than when stacking or filling. .
8. The height of the tons have to not obstruct the driver's sight. In unique circumstances, when the product influences the forward vision, drive at a reduced speed when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving rate of the forklift in the manufacturing facility location is 5 km/h, and it must drive safely at a reduced rate when going into the production workshop area. .
11. When the forklift is lifted, lifted or driven, it is forbidden for personnel to stand on the fork to hold items and play a stabilizing function. .
12. If troubles are located, they will certainly be repaired and reported in a timely fashion, and they will certainly never ever operate with health problems or conceal them.

packing and discharging.
1. When fork-loading items, the distance in between both forks must be changed as required to make the tons of the two forks well balanced and not skewed, and one side of the product need to be against the rack. .
2. It is restricted to collaborate with a single fork or use a fork top or draw. In unique circumstances, security warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of filling and unloading things, the forklift should be stopped with the brake. .
4. The rate of the vehicle need to be sluggish and constant. Beware not to roll the wheels on the dunnage, so as not to extend the rolled items and harm people. .
5. When utilizing a fork to fork the goods, the fork must be as deep as feasible under the tons, and it needs to be noted that the fork tip ought to not touch various other items or objects. The load ought to be supported with minimal back tilt of the gantry to ensure that the lots does not glide backwards. The mast can be tilted ahead somewhat when the lots is decreased to allow for simple positioning of the lots and removal of the forks. .
6. It is restricted to fork items at broadband and ram difficult things with the fork head. Stand-on Electric Pallet Stacker .
7. When the forklift is working, it is forbidden for people to stand around the fork, so as to stay clear of the collapse of the goods and hurt people. .
8. Straining is forbidden, and it is restricted to use forks to lift workers to engage in high-altitude operations to stay clear of high-altitude dropping crashes. .
9. It is not enabled to use the brake inertia to slide, put, round or roll items. .
10. It is not allowed to use forks to select, turn pallet unload.

Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you have to dump the goods or lower the fork frame.
2. Pull the hand brake deal with to dead or depress the emergency brake button.
3. The engine is shut off and the power is removed. (Except for special situations, such as the vehicle driver does not leave the vehicle's line of vision and does not Electric Forklift Truck for Warehouse go beyond 1 minute).
4. Remove the secret. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the appearance must be examined, and fuel, lubricating oil and air conditioning water need to be added.
2. Inspect the safety efficiency of beginning, running and braking.
3. Inspect whether the lights and horn signals are full and effective.
4. During the operation of the forklift, check whether the stress and temperature are normal.
5. After the forklift is running, the exterior leakage ought to additionally be inspected and the seals need to be changed in time.

Forklift Safety Operation Specifications.
1. You should examine before leaving the automobile;.
2. When you run into somebody before you throughout driving, you ought to send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the nadir of the freight should be 0.3 m ~ 0.4 m above the ground;.
5. The transforming ought to not be too sharp to avoid the propensity of " totally free switching";.
6. Running up and down the incline must be sluggish and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is greater than 10%, the automobile ought to be driven in reverse when declining;.
8. When the forklift employees bring the goods and move on, if they come across big or hefty goods and most likely to the chauffeur's view, they must take the turning around exercise
.
The "Eight Prohibitions" need to be complied with in the procedure.
1. Single fork operation is not permitted.
2. It is not allowed to raise the goods for long distance driving.
3. It is not enabled to grab the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not allowed to use braking force to exile round or easy-to-roll things.
7. It is not permitted to bring people to work with the pallet or fork, and it is purely restricted to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Car park is not allowed under the list below problems.
1. Contours, narrow roadways, train crossings;.
2. Areas with a longitudinal slope greater than 5%.
3. When there is an obstacle on one side of the roadway, the opposite side of the area with the very same length as the obstacle must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844